000 02273nam  2200325za 4500
0019.840780
003CaOODSP
00520221107151927
007cr |||||||||||
008170801s1970    oncad   ob   f000 0 eng d
040 |aCaOODSP|beng
043 |an-cn---
0861 |aM38-8/97E-PDF|zM38-8/97
1001 |aSmith, E.
24514|aThe application of dark-field electron miroscopy to the determination of crystallite size in ferrites |h[electronic resource] / |cE. Smith, Physical Metallurgy Division ; Sutarno, Mineral Sciences Division.
260 |aOttawa : |bQueen's Printer, |c1970.
300 |ap. lix-lxi : |bcharts, ill.
4901 |aReprint series ; |vRS 97
500 |aCover title.
500 |a"Reprinted from the Canadian Ceramic Society, (1969), vol. 38, pp. 9-13."
500 |aHistorical publication digitized from print 2017 [by Natural Resources Canada].
504 |aIncludes bibliographical references.
5203 |a"Barium and strontium ferrites were prepared by coprecipitation from nitrate solutions, filtering and calcining at 1100°C or 1300°C. The calcined powders were ground in a steel mortar. A method was developed for supporting the powders in thin plastic films for electron microscopy. Powders were examined by electron microscopy in bright and dark fields, and by electron diffraction. Three types of particle in the micron range of size were found, two being monocrystalline and one finely polycrystalline with a crystallite size of about 500Â. It was not possible to distinguish between these particles without the use of electron diffraction. It was found that the grains of the barium ferrites were generally smaller than those of the strontium ferrites prepared under similar conditions, and that the grain sizes of both increased with calcining temperature"--Abstract, p. lxi.
69207|2gccst|aCeramics
7001 |aSutarno, R.
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bDepartment of Energy, Mines and Resources.
7101 |aCanada. |bMines Branch.
830#0|aReprint series - Dept. of Energy, Mines and Resources, Mines Branch ;|vRS 97|w(CaOODSP)9.834843
85640|qPDF|s1.99 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M38-8/M38-8-97-eng.pdf