000 02487nam  2200349za 4500
0019.841172
003CaOODSP
00520221107152025
007cr |||||||||||
008170808s1966    oncad   ob   f000 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn-qu
0861 |aM34-20/76E-PDF|zM34-20/76
1001 |aKelly, F. J.
24512|aA comparison of manual and automatic control of the grinding circuit at East Malartic Mines Limited, Norrie, Quebec |h[electronic resource] / |cF.J. Kelly and W.A. Gow, Extraction Metallurgy Division.
260 |aOttawa : |bQueen's Printer, |c1966.
300 |aiv, 18 p. : |bcharts, ill.
4901 |aTechnical bulletin ; |vTB 76
500 |aCover title.
500 |a"September 1966."
500 |aDigitized edition from print [produced by Natural Resources Canada].
504 |aIncludes bibliographical references.
5203 |a“Surveys were made of the East Malartic Mines Limited grinding circuit while it was under manual control and when it was under automatic control. The automatic control system used involved the measurement of the intensity of a narrow frequency range of the sound emanating from the grinding units, and control of the feed rate so as to maintain the sound intensity at a pre-set value. Eighty per cent of the control signal came from the primary open-circuit rod mill and the remaining twenty per cent from one of two secondary ball mills operating in parallel in closed circuit with hydraulic cyclones. The surveys showed that the application of automatic control resulted in a significant reduction in the variability of the fineness of grind, and in the variability of the screen analyses, of all the products from the grinding circuit. For example, under manual control the 50% passing size of the rod mill discharge varied from 48 mesh to 150 mesh, while under automatic control the variation was within one Tyler screen size, i.e. from just less than 28 mesh to just less than 35 mesh"--Abstract, p. i.
546 |aIncludes abstract in French.
69207|2gccst|aMining industry
69207|2gccst|aEquipment
7001 |aGow, W. A.
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bMines Branch.
830#0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 76|w(CaOODSP)9.834857
85640|qPDF|s5.84 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-76-eng.pdf