|
000
| 01953nam 2200349za 4500 |
|---|
| 001 | 9.841301 |
|---|
| 003 | CaOODSP |
|---|
| 005 | 20221107152043 |
|---|
| 007 | cr ||||||||||| |
|---|
| 008 | 170809s1968 onca ob f000 0 eng d |
|---|
| 040 | |aCaOODSP|beng |
|---|
| 041 | |aeng|bfre |
|---|
| 043 | |an-cn--- |
|---|
| 086 | 1 |aM34-20/98E-PDF|zM34-20/98 |
|---|
| 100 | 1 |aGarrison, J. G. |
|---|
| 245 | 10|aSea water crevice corrosion tests on uranium-bearing AISI Type 430 stainless steels |h[electronic resource] / |cJ.G. Garrison and G.J. Biefer, Physical Metallurgy Division. |
|---|
| 260 | |aOttawa : |bQueen's Printer, |c1968. |
|---|
| 300 | |aii, 15 p. : |bill. |
|---|
| 490 | 1 |aTechnical bulletin ; |vTB 98 |
|---|
| 500 | |aCover title. |
|---|
| 500 | |a"February 1968." |
|---|
| 500 | |aDigitized edition from print [produced by Natural Resources Canada]. |
|---|
| 504 | |aIncludes bibliographical references (p. 10). |
|---|
| 520 | 3 |a“Tests were conducted to determine the effects of uranium additions in the optimum range of about 0.25-0.5% on the resistance to crevice corrosion of AISI Type 430 stainless steel when immersed in sea water. As compared with a similar uranium-free steel, there was an improved resistance to crevice corrosion for steels containing 0.24% and 0.55% uranium. However, reproducibility of the results was poor; none of the alloys tested performed well, and it was concluded that uranium additions cannot be relied upon to suppress crevice corrosion attack in Type 430 stainless steel"--Abstract, p. i. |
|---|
| 546 | |aIncludes abstract in French. |
|---|
| 692 | 07|2gccst|aSteel |
|---|
| 692 | 07|2gccst|aSalt water |
|---|
| 700 | 1 |aBiefer, G. J., |d1921- |
|---|
| 710 | 1 |aCanada. |bNatural Resources Canada. |
|---|
| 710 | 1 |aCanada. |bMines Branch. |
|---|
| 830 | #0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 98|w(CaOODSP)9.834857 |
|---|
| 856 | 40|qPDF|s2.54 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-98-eng.pdf |
|---|