000 02291cam  2200337za 4500
0019.841371
003CaOODSP
00520221107152054
007cr |||||||||||
008170810s1970    oncad   ob   f000 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn---
0861 |aM34-20/119E-PDF|zM34-20/119
1001 |aLapointe, C. M.
24514|aThe measurement of the surface area of minerals with a modified Perkin-Elmer sorptometer |h[electronic resource] / |cC.M. Lapointe, Mineral Sciences Division.
260 |aOttawa : |bQueen's Printer, |c1970.
300 |aiv, 27 p. : |bcharts, ill.
4901 |aTechnical bulletin ; |vTB 119
500 |aCover title.
500 |a"April 1970."
500 |aDigitized edition from print [produced by Natural Resources Canada].
504 |aIncludes bibliographical references (p. 17).
5203 |a“The performance of a Model 212-D Perkin-Elmer Sorptometer has been studied for the measurement of surface areas in the range of specific surface areas between 200 cm2/g and 1000 cm2/g. It was found that, with some modifications to the instrument with regard to the transfer of the desorbed gas from the sample to the detector, the Sorptometer could be used for the surface area measurement of relatively large samples of mineral particles. This Bulletin describes a simplification of the Brunauer–Emmett–Teller (BET) method that can be used for the routine measurement of surface areas on samples of similar characteristics by the one-point determination. The method can be extended to a two-point or a three-point determination in order to obtain a conventional BET plot. A standard procedure is outlined for the calibration of the instrument, for the sample preparation, for the adsorption measurement, and for the calculation of the specific areas"--Abstract, p. i.
546 |aIncludes abstract in French.
69207|2gccst|aMinerals
69207|2gccst|aMeasurement
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bMines Branch.
830#0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 119|w(CaOODSP)9.834857
85640|qPDF|s2.79 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-119-eng.pdf