000
| 02078nam 2200349za 4500 |
---|
001 | 9.841416 |
---|
003 | CaOODSP |
---|
005 | 20221107152101 |
---|
007 | cr ||||||||||| |
---|
008 | 170810s1971 oncd ob f000 0 eng d |
---|
040 | |aCaOODSP|beng |
---|
041 | |aeng|bfre |
---|
043 | |an-cn--- |
---|
086 | 1 |aM34-20/127E-PDF|zM34-20/127 |
---|
100 | 1 |aGilmore, A. J. |
---|
245 | 10|aRecovery of copper and zinc from mine waste effluents with carboxylic-type ion-exchange resins |h[electronic resource] / |cA.J. Gilmore, Extraction Metallurgy Division. |
---|
260 | |aOttawa : |bInformation Canada, |c1971. |
---|
300 | |aiii, 8 p. : |bcharts |
---|
490 | 1 |aTechnical bulletin ; |vTB 127 |
---|
500 | |aCover title. |
---|
500 | |aAt head of title: Mines Branch program on environmental improvement. |
---|
500 | |a"December 1970." |
---|
500 | |aDigitized edition from print [produced by Natural Resources Canada]. |
---|
504 | |aIncludes bibliographical references. |
---|
520 | 3 |a“The recovery of copper and zinc from synthesized mine waste effluents containing up to 7.0 g/l of total metal with the Rohm and Haas Limited carboxylic-type resins Amerlite IRC 50 and IRC 84 has been investigated. The adsorption characteristics of the resins from the Na+, NH4+ and H+ forms at feed pH values of from 3.6 to 6.0 were determined. The results of the work showed that under all conditions investigated the metals broke through very early in the adsorption cycle. An ion exchange operation run under these conditions to produce an effluent containing <0.1 ppm of metal could be expensive, due to high capital cost in equipment and resin inventory"--Abstract, p. i. |
---|
546 | |aIncludes abstract in French. |
---|
692 | 07|2gccst|aMetals |
---|
692 | 07|2gccst|aProcessing |
---|
710 | 1 |aCanada. |bNatural Resources Canada. |
---|
710 | 1 |aCanada. |bMines Branch. |
---|
830 | #0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 127|w(CaOODSP)9.834857 |
---|
856 | 40|qPDF|s1.27 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-127-eng.pdf |
---|