000 02360nam  2200337za 4500
0019.841460
003CaOODSP
00520221107152107
007cr |||||||||||
008170810s1971    oncad   ob   f000 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn---
0861 |aM34-20/132E-PDF|zM34-20/132
1001 |aBiefer, G. J., |d1921-
24510|aPreliminary measurements of the environmental cracking behaviour of titanium alloy 721 |h[electronic resource] / |cG.J. Biefer and J.G. Garrison, Physical Metallurgy Division.
260 |aOttawa : |bInformation Canada, |c1971.
300 |aiv, 15 p. : |bchart, ill.
4901 |aTechnical bulletin ; |vTB 132
500 |aCover title.
500 |a"February 1971."
500 |aDigitized edition from print [produced by Natural Resources Canada].
504 |aIncludes bibliographical references.
5203 |a“In order to test the functioning of equipment, and to gain some initial experience concerning the environmental cracking susceptibility of Ti-7%Al-2%Nb-1%Ta (Ti-721) alloy, some tests were carried out on notched, precracked specimens loaded as cantilevers. In tests performed in 3.5% NaCl solution, it was confirmed that, subsequent to a sensitizing heat treatment designed to produce Ti3Al (8 hr at 650°C (1202°F)), alloy Ti-721 is extremely susceptible to environmental cracking. It is somewhat more resistant in the as-rolled condition. Environmental cracking tests in which specimens were broken under a gradually rising load were found to give very nearly the same results as did time-to-failure tests under a constant load. It appeared, therefore, that the rising-load method was sufficiently accurate for screening tests of alloys resembling Ti-721, though constant load tests might sometimes be needed for a more precise determination of the critical stress-intensity threshold for cracking, KISCC"--Abstract, p. i.
546 |aIncludes abstract in French.
69207|2gccst|aMetals
7001 |aGarrison, J. G.
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bMines Branch.
830#0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 132|w(CaOODSP)9.834857
85640|qPDF|s2.13 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-132-eng.pdf