000 02337cam  2200337za 4500
0019.841721
003CaOODSP
00520221107152146
007cr |||||||||||
008170815s1974    oncad   o    f000 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn---
0861 |aM34-20/185E-PDF|zM34-20/185
1001 |aReeve, D. A.
24510|aCalibration of pressure-measuring systems of movable-wall coke ovens |h[electronic resource] / |cD.A. Reeve and J.C. Botham, Metals Reduction and Energy Centre.
260 |aOttawa : |bInformation Canada, |c1974.
300 |aiii, 9 p. : |bcharts, ill.
4901 |aTechnical bulletin ; |vTB 185
500 |aCover title.
500 |a"March 1974."
500 |aDigitized edition from print [produced by Natural Resources Canada].
520 |a“Whenever technical-scale movable-wall coke ovens are used to evaluate the relative coking propensities of metallurgical coals, carbonization pressures generated within the ovens must be recorded accurately. A Task Group of ASTM Committee D-5 on coal and coke requested the Mines Branch to design a system for the calibration of movable-wall coke ovens for pressure. In the method adopted, known internal pressures were applied to the hot oven walls with a rubber bag connected to a compressed air supply and protected by a ceramic form from the walls. A second method was also developed in which a hydraulic jack within the hot oven generated the required pressures. The first method was found to be unsatisfactory because of friction between the oven sole and the ceramic form and because of distortion of the rubber bag. The second method provided an acceptable correlation between internally-applied and externally-measured pressures when the oven was hot and has now been adopted for use in the Mines Branch movable-wall coke ovens"--Summary, p. i.
546 |aIncludes summary in French.
69207|2gccst|aCoal
69207|2gccst|aProcessing
7001 |aBotham, J. C.
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bMines Branch.
830#0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 185|w(CaOODSP)9.834857
85640|qPDF|s1.73 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-185-eng.pdf