00000nam 2200000za 4500 9.844132 CaOODSP 20221107152658 cr ||||||||||| 171020s2001 oncado |o f|0| 0 eng d CaOODSP eng eng fre n-cn--- NH17-165/2001E-PDF Hazleden, Don. Envelope drying rates experiment [electronic resource] : final report / prepared on behalf of Forintek Canada Corp. by Don Hazleden ; prepared for Canada Mortgage and Housing Corp. Ottawa : Canada Mortgage and Housing Corporation, 2001. 1 vol. (in various pagings) : ill., charts, photos "March, 2001." Digitized edition from print produced 2015 [for Canada Mortgage and Housing Corporation]. Includes bibliographic references. "The design and construction of building envelopes must be based on the assumption that some moisture will accumulate in the wall assembly, during construction and during the life of the building. Construction practices for multi-unit wood frame residential buildings in the coastal area of British Columbia, Canada are changing in response to a large number of envelope failures experienced in the period from 1985 to 1999. The new design approach includes the use of enhanced deflection and a drained cavity. While this approach will manage a large portion of the exterior moisture load, designs may also need to incorporate enhanced drying capabilities. A research program conducted at Forintek Canada Corp.’s western lab in Vancouver, Canada has evaluated the relative drying rates of wall assemblies under controlled laboratory conditions. The research ranks test wall panels in terms of their relative drying capacities, identifies potential wall locations at greater risk of slow drying (thus requiring enhanced material durability) and derives baseline data which can be used to improve parametric models of wall performance."--Abstract. Abstract in French. gccst Construction materials gccst Housing gccst Technical reports Forintek Canada Corp. Canada Mortgage and Housing Corporation. PDF 21.41 MB https://publications.gc.ca/collections/collection_2017/schl-cmhc/NH17-165-2001-eng.pdf