000 01998nam  2200325za 4500
0019.865026
003CaOODSP
00520221107161711
007cr |||||||||||
008181121s1975    onc    #ot   f|0| 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn---
0861 |aM38-13/76-8E-PDF|zM38-13/76-8
1001 |aMalhotra, V. M.
24510|aComparison of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number |h[electronic resource] / |cV. M. Malhotra and G. Carette.
260 |a[Ottawa] : |bEnergy, Mines and Resources Canada, |c1975.
300 |avii, 42 p. : |bfigures.
4901 |aCANMET report ; |v76-8E
500 |aCover title.
500 |a"November 1975."
504 |aIncludes bibliographic references.
520 |a"This paper presents comparisons of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number. Briefly, a pull-out test, which is relatively a new technique, measures with a special tension ram the force required to pull out a specially shaped steel rod whose enlarged end has been cast into the concrete. In this study pull-out tests were performed on 2 x 2 x 1-ft (610 x 610 x 305-mm) concrete blocks. Compressive strengths were obtained on 4 x 8-in. (102 x 203-mm) and 6 x 12-in. (152 x 305-mm) cylinders; also 4 x 8-in. (102 x 203-mm) cores were drilled from the blocks and tested in compression. In addition, pulse velocity measurements and Schmidt rebound hammer readings were also taken on the blocks"--Synopsis, p. i.
546 |aIncludes synopsis in French.
69207|2gccst|aConcrete
69207|2gccst|aScientific research
7001 |aCarette, G. G.
7101 |aCanada. |bEnergy, Mines and Resources Canada.
830#0|aCANMET report ;|v76-8E.|w(CaOODSP)9.852792
85640|qPDF|s2.76 MB|uhttps://publications.gc.ca/collections/collection_2018/rncan-nrcan/m38-13/M38-13-76-8-eng.pdf