000 02056cam  2200397zi 4500
0019.869536
003CaOODSP
00520221107162857
006m     o  d f      
007cr |||||||||||
008190308t19651965onc    #ot   f|0| 0 eng d
040 |aCaOODSP|beng|erda|cCaOODSP
041 |aeng|bfre
043 |an-cn---
0861 |aM38-1/152-1965E-PDF|zM38-1/152
1001 |aCouture, A., |eauthor.
24510|aProperties of sand-cast magnesium alloys. |nPart VI, |pEffect of pouring temperature and holding time / |cA. Couture & J.W. Meier, Physical Metallurgy Division.
264 1|aOttawa : |bDepartment of Mines and Technical Surveys, Mines Branch, |c1965.
264 4|c©1965
300 |a1 online resource (v, 26 pages) : |bfigures.
336 |atext|btxt|2rdacontent
337 |acomputer|bc|2rdamedia
338 |aonline resource|bcr|2rdacarrier
4901 |aResearch report ; |vR 152
500 |aDigitized edition from print [produced by Natural Resources Canada].
500 |aTitle from cover.
500 |a"February 1965."
504 |aIncludes bibliographic references.
520 |a"The influence of pouring temperature and holding time before pouring on the mechanical properties .and chemical composition of several magnesium casting alloys has been investigated and the results, obtained on sand-cast four-bar moulds, are reported in the present report. The pouring temperature was varied from 700°C (1290°F) to 850°C (1560°F) and the holding time from 10 min to 2 hr at normal pouring temperature. Other melts were held at 700°C or 850°C for 30 min before pouring"--Abstract.
546 |aIncludes abstract in French.
69207|2gccst|aMetals
7001 |aMeier, J. W., |eauthor.
7101 |aCanada. |bDepartment of Mines and Technical Surveys.
7101 |aCanada. |bMines Branch.
830#0|aResearch report (Canada. Mines Branch)|vR 152.|w(CaOODSP)9.855660
85640|qPDF|s912 KB|uhttps://publications.gc.ca/collections/collection_2019/rncan-nrcan/m38-1/M38-1-152-1965-eng.pdf