00000000nam 2200000zi 4500
0019.877086
003CaOODSP
00520241203113650
006m     o  d f      
007cr |||||||||||
008190726s1990    oncad  #ob   f000 0 eng d
040 |aCaOODSP|beng|erda|cCaOODSP
041 |aeng|bfre
043 |an-cn---|an-us---
0861 |aEn13-5/90-143E-PDF
1001 |aEngel, Peter, |d1938- |eauthor.
24510|aPreliminary tests for the ISO-kinetic calibration of the DH-81 suspended sediment sampler / |cby P. Engel and I.G. Droppo.
264 1|aBurlington, Ontario : |bNational Water Research Institute = Institut national de recherche sur les eaux, |c[1990]
300 |a1 online resource (iv, 22 pages, 19 unnumbered pages) : |billustrations, graphs.
336 |atext|btxt|2rdacontent
337 |acomputer|bc|2rdamedia
338 |aonline resource|bcr|2rdacarrier
4901 |aNWRI contribution ; |v90-143
500 |aDigitized edition from print [produced by Environment and Climate Change Canada].
504 |aIncludes bibliographical references (pages 21-22).
520 |a"Dimensional considerations and detailed tests in a towing tank were used to determine the response of the US DH-81 suspended sediment sampler to flow velocity. The data revealed a clear relationship between sampling rate and the size of the air exhaust port for the operating range of this instrument. It was observed, that the importance of the diameter of the air vent relative to the inside diameter of the intake nozzle decreased as their ratio increased, indicating that there is a transition point between nozzle control and air vent control governing the inflow to the sampler. It was further shown, using dimensional analysis, that a single dimensionless calibration curve can be established which is valid at all water temperatures likely to be encountered during measurements in the field. Further tests are recommended to determine the effect of nozzle diameter on the dimensionless calibration curve and the control regime of the D-77, DH-81 and other samplers used by data gathering agencies"--Summary, page iii.
546 |aIncludes summary and management perspective in English and French.
69207|2gccst|aSediments
69207|2gccst|aMeasurement
69207|2gccst|aScientific equipment
7001 |aDroppo, I. G., |eauthor.
7101 |aCanada. |bEnvironment Canada.
7102 |aNational Water Research Institute (Canada)
830#0|aNWRI contribution ;|v90-143.|w(CaOODSP)9.844121
85640|qPDF|s3.20 MB|uhttps://publications.gc.ca/collections/collection_2019/eccc/en13-5/En13-5-90-143-eng.pdf