000 02155nam  2200337za 4500
0019.841275
003CaOODSP
00520221107152040
007cr |||||||||||
008170809s1968    onca    ob   f000 0 eng d
040 |aCaOODSP|beng
041 |aeng|bfre
043 |an-cn---
0861 |aM34-20/91E-PDF|zM34-20/91
1001 |aGarrison, J. G.
24512|aA comparison of field and laboratory corrosion tests of AISI Type 430 stainless steels |h[electronic resource] / |cJ.G. Garrison and G.J. Biefer, Physical Metallurgy Division.
260 |aOttawa : |bQueen's Printer, |c[1968?]
300 |aiv, 19 p. : |bill.
4901 |aTechnical bulletin ; |vTB 91
500 |aCover title.
500 |a"July 1967."
500 |aDigitized edition from print [produced by Natural Resources Canada].
504 |aIncludes bibliographical references (p. 10-11).
5203 |a“Field tests and accelerated dip-and-dry laboratory tests were carried out to determine the effects of additions of uranium and molybdenum on the corrosion properties of AISI Type 430 stainless steel used as automotive trim. A slight increase in corrosion resistance was obtained with an alloy containing 0.24% uranium, while no deleterious effect was experienced with an alloy containing 0.55% uranium. Increased corrosion resistance was observed with increased molybdenum for two alloys, one of which contained 1.02% and the other 2.03% molybdenum. Correlation of results between the accelerated dip-and-dry laboratory tests and the field tests was not entirely satisfactory. There was, however, some area of agreement between these tests, and further use of the accelerated laboratory test appears warranted"--Abstract, p. i.
546 |aIncludes abstract in French.
69207|2gccst|aSteel
7001 |aBiefer, G. J., |d1921-
7101 |aCanada. |bNatural Resources Canada.
7101 |aCanada. |bMines Branch.
830#0|aTechnical bulletin (Canada. Dept. of Energy, Mines and Resources. Mines Branch)|vTB 91|w(CaOODSP)9.834857
85640|qPDF|s3.57 MB|uhttps://publications.gc.ca/collections/collection_2017/rncan-nrcan/M34-20/M34-20-91-eng.pdf