000 02172cam  2200289za 4500
0019.843633
003CaOODSP
00520221107152551
007cr |||||||||||
008171212s1986    onca   |o    f|0| 0 eng d
040 |aCaOODSP|beng
043 |an-cn---
0861 |aNH17-140/1986E-PDF
1001 |aLove, J. A.|q(James A.)
24510|aAirtightness testing methods for multi-unit housing |h[electronic resource] / |cby J.A. Love.
260 |a[Ottawa : |bCanada Mortgage and Housing Corporation], |c1986.
300 |aiv, 23 p. : |bill.
500 |a"December, 1986."
504 |aIncludes bibliographic references.
5203 |a"Pressure testing is an accepted method of determining the airtightness of building envelopes. Current testing standards do not address measurement of airtightness of attached dwellings. This is a special case due to potential airflow across party walls. Airflow into the test dwelling from adjacent dwellings can be eliminated by equalizing the pressure in the test and adjacent dwellings. The significance of party wall leakage in 1-4 row house from five different projects was demonstrated by comparing results obtained by this procedure with those obtained by standard test methods. A proposed alternative method (Nylund's method) of correcting for party wall leakage involves computations based on measurement of indoor-outdoor pressure differentials in dwellings adjacent to the test dwelling while the latter is pressure tested. A pilot field study of this method was carried out. Results from correction by pressure equalization were compared with results from correction by Nylund's method. An average agreement within 6.5' was found. Use of the data generated by Nylund's method to calculate common measures of airtightness is discussed"--Abstract.
69207|2gccst|aHousing
69207|2gccst|aTesting
693 4|aPressure testing
693 4|aAirtightness
7102 |aCanada Mortgage and Housing Corporation.|bExternal Research Program.
7102 |aCanada Mortgage and Housing Corporation.
85640|qPDF|s825 KB|uhttps://publications.gc.ca/collections/collection_2017/schl-cmhc/nh17/NH17-140-1986-eng.pdf