|
000
| 01960cam 2200397za 4500 |
|---|
| 001 | 9.849515 |
|---|
| 003 | CaOODSP |
|---|
| 005 | 20221107153931 |
|---|
| 007 | cr ||||||||||| |
|---|
| 008 | 180104s1985 onca|||fob f000 0 eng d |
|---|
| 040 | |aCaOODSP|beng |
|---|
| 041 | |aeng|bfre |
|---|
| 043 | |an-cn--- |
|---|
| 086 | 1 |aEn13-5/86-103E-PDF |
|---|
| 100 | 1 |aRoy, F. E. |
|---|
| 245 | 10|aLaboratory demonstration of an electromagnetic method for river velocity measurement |h[electronic resource] / |cby F.E. Roy and J.S. Ford. |
|---|
| 260 | |aBurlington, Ont. : |bHydraulics Division, National Water Research Institute, Canada Centre for Inland Waters, |c1985. |
|---|
| 300 | |aii, 13, [6] p. : |bill. |
|---|
| 490 | 1 |aNWRI contribution ; |v86-103 |
|---|
| 500 | |a"December 1985". |
|---|
| 500 | |a"ES-570". |
|---|
| 500 | |a"Study 85-344". |
|---|
| 500 | |aDigitized edition from print [produced by Environment and Climate Change Canada]. |
|---|
| 504 | |aIncludes bibliographical references: p. 13. |
|---|
| 520 | 3 |a"An operating laboratory model was set up to demonstrate the electromagnetic method of river gauging, as described by Hershey (1978). The model set up is documented, and the results of some flow calibration runs are presented. The discharge rating of the setup was found to be linear in terms of the measured signal voltage and the immersed depth of the electrodes. The discharge rating was not affected by a change in bed level at the metering section"--Abstract. |
|---|
| 546 | |aIncludes abstract and management perspective in French. |
|---|
| 692 | 07|2gccst|aHydrology |
|---|
| 692 | 07|2gccst|aRivers |
|---|
| 692 | 07|2gccst|aMethodology |
|---|
| 700 | 1 |aFord, J. S. |
|---|
| 710 | 1 |aCanada. |bEnvironment Canada. |
|---|
| 710 | 2 |aNational Water Research Institute (Canada) |
|---|
| 830 | #0|aNWRI contribution ;|vno. 86-103|w(CaOODSP)9.844121 |
|---|
| 856 | 40|qPDF|s1.26 MB|uhttps://publications.gc.ca/collections/collection_2018/eccc/En13-5-86-103-eng.pdf |
|---|