000
| 01998nam 2200325za 4500 |
---|
001 | 9.865026 |
---|
003 | CaOODSP |
---|
005 | 20221107161711 |
---|
007 | cr ||||||||||| |
---|
008 | 181121s1975 onc #ot f|0| 0 eng d |
---|
040 | |aCaOODSP|beng |
---|
041 | |aeng|bfre |
---|
043 | |an-cn--- |
---|
086 | 1 |aM38-13/76-8E-PDF|zM38-13/76-8 |
---|
100 | 1 |aMalhotra, V. M. |
---|
245 | 10|aComparison of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number |h[electronic resource] / |cV. M. Malhotra and G. Carette. |
---|
260 | |a[Ottawa] : |bEnergy, Mines and Resources Canada, |c1975. |
---|
300 | |avii, 42 p. : |bfigures. |
---|
490 | 1 |aCANMET report ; |v76-8E |
---|
500 | |aCover title. |
---|
500 | |a"November 1975." |
---|
504 | |aIncludes bibliographic references. |
---|
520 | |a"This paper presents comparisons of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number. Briefly, a pull-out test, which is relatively a new technique, measures with a special tension ram the force required to pull out a specially shaped steel rod whose enlarged end has been cast into the concrete. In this study pull-out tests were performed on 2 x 2 x 1-ft (610 x 610 x 305-mm) concrete blocks. Compressive strengths were obtained on 4 x 8-in. (102 x 203-mm) and 6 x 12-in. (152 x 305-mm) cylinders; also 4 x 8-in. (102 x 203-mm) cores were drilled from the blocks and tested in compression. In addition, pulse velocity measurements and Schmidt rebound hammer readings were also taken on the blocks"--Synopsis, p. i. |
---|
546 | |aIncludes synopsis in French. |
---|
692 | 07|2gccst|aConcrete |
---|
692 | 07|2gccst|aScientific research |
---|
700 | 1 |aCarette, G. G. |
---|
710 | 1 |aCanada. |bEnergy, Mines and Resources Canada. |
---|
830 | #0|aCANMET report ;|v76-8E.|w(CaOODSP)9.852792 |
---|
856 | 40|qPDF|s2.76 MB|uhttps://publications.gc.ca/collections/collection_2018/rncan-nrcan/m38-13/M38-13-76-8-eng.pdf |
---|