Properties of sand-cast magnesium alloys. Part VII: the effect of wall thickness on tensile properties of Mg-Al-Zn alloy castings / A. Couture and J.W. Meier. : M38-1/153-1965E-PDF
"It has been shown in earlier investigations that, under favourable solidification conditions (e.g., in premium-quality castings), high mechanical properties may be obtained regardless of wall thickness. In commercial castings, however, it is not always possible (or economical) to avoid some reduction of mechanical properties in heavier sections of the casting. The present investigation was carried out to explore the effect of section thickness on properties of alloys AZ 80, AZ91 and AZ92 in various temper conditions. To eliminate other factors affecting solidification conditions, all castings were produced using standard foundry practice for green sand casting, without the use of any chills or insulating materials"--Abstract, page i.
Lien permanent pour cette publication :
publications.gc.ca/pub?id=9.869726&sl=1
| Ministère/Organisme | Canada. Department of Mines and Technical Surveys. Canada. Mines Branch. |
|---|---|
| Titre | Properties of sand-cast magnesium alloys. Part VII: the effect of wall thickness on tensile properties of Mg-Al-Zn alloy castings / A. Couture and J.W. Meier. |
| Variante du titre | Effect of wall thickness on tensile properties of Mg-Al-Zn alloy castings |
| Titre de la série | Research report ; R 153 |
| Type de publication | Série - Voir l'enregistrement principal |
| Langue | [Anglais] |
| Format | Électronique |
| Document électronique | |
| Note(s) | Digitized edition from print [produced by Natural Resources Canada]. Title from cover. Includes bibliographic references (pages 18-19). Includes abstract in French. |
| Information sur la publication | Ottawa : Department of Mines and Technical Surveys, Mines Branch, March, 1965. ©1966 |
| Auteur / Contributeur | Couture, A., author. Meier, J. W., author. |
| Description | 1 online resource (v, 41 pages) : illustrations, charts. |
| Numéro de catalogue |
|
| Descripteurs | Magnesium alloys |
Demander des formats alternatifs
Pour demander une publication dans un format alternatif, remplissez le formulaire électronique des publications du gouvernement du Canada. Utilisez le champ du formulaire «question ou commentaire» pour spécifier la publication demandée.- Date de modification :