000 01888cam  2200373zi 4500
0019.877953
003CaOODSP
00520221107165117
006m    go  d f      
007cr |n|||||||||
008190814s1992    oncda  #otb  f000 0 eng d
040 |aCaOODSP|beng|erda|cCaOODSP
041 |aeng|bfre
043 |an-cn---
0861 |aEn13-5/92-18E-PDF
1001 |aEngel, Peter, |d1938- |eauthor.
24510|aUncertainty in the calibration of the DH-48 suspended sediment sampler / |cP. Engel.
264 1|aBurlington, Ontario : |bNational Water Research Institute, |c[1992]
300 |a1 online resource (14, [9] pages) : |bfigures.
336 |atext|btxt|2rdacontent
337 |acomputer|bc|2rdamedia
338 |aonline resource|bcr|2rdacarrier
4901 |aNWRI contribution ; |v92-18
500 |aDigitized edition from print [produced by Environment and Climate Change Canada].
500 |aCover title.
504 |aIncludes bibliographical references (pages 13-14).
520 |a"Tests were conducted in the towing tank at NWRI on a DH-48 sediment sampler with carefully selected nozzles. Statistical analysis of the test data were conducted. It was shown that this type of sampler can be calibrated with a sufficient degree of repeatability and that complete calibration of individual samplers is not necessary. It was further shown that nozzles issued with each sampler can be exchanged with similar nozzles in the field and no further calibrations are required"--Abstract.
546 |aIncludes abstract in French.
69207|2gccst|aSediments
7101 |aCanada. |bEnvironment Canada.
7102 |aNational Water Research Institute (Canada)
830#0|aNWRI contribution ;|v92-18.|w(CaOODSP)9.844121
85640|qPDF|s1.93 MB|uhttps://publications.gc.ca/collections/collection_2019/eccc/en13-5/En13-5-92-18-eng.pdf