Glass insert stressmeters / K. Barron, Fuels and Mining Practice Division. : M38-8/15E-PDF

"The glass insert stressmeter, or photoelastic stressmeter, is an instrument designed to determine stress changes occurring in rocks. It has several potential advantages over other such devices in that it is a biaxial device, it is simple and it is cheap to make. The object of this study was to assess the behaviour of the meter under biaxial loads and to examine some of the problems associated with measurement and interpretation of the fringe pattern. This assessment has been carried out by comparing theoretical and laboratory behaviour of the meter. It has been shown that: a) There are certain optimum measuring points in the meter at which measurements should be made for best accuracy. The position of the points depends on the ratio, n, of the biaxial stresses. b) The meter's sensitivity can be assumed to be independent of the rock modulus E provided that the rock modulus is < 2.5 x 10 6 psi and not, as previous works have assumed, if E < 5 x 10 6 psi. c) There are several methods of separating the principal stresses; some of these are unsatisfactory. A new method is proposed and discussed. d) The meter sensitivity decreases as the ratio of the biaxial stresses approaches unity; the accuracy thus also decreases. e) The axes of symmetry of the fringe pattern give an excellent indication of applied stress direction. f) Laboratory calibrations are in good agreement with theory"--p. 497.

Lien permanent pour cette publication :
publications.gc.ca/pub?id=9.840158&sl=1

• Format MARC XML
• Format MARC HTML

Demander des formats alternatifs