Experiments with radiant heat for drying minerals / R.A. Wyman and T. Marshall, Mineral Processing Division. : M34-20/183E-PDF
“Bulk drying requirements of the Industrial Minerals Milling Section, Mineral Processing Division, Mines Branch, EMR, Ottawa, Canada, range from a few pounds to several tons of varied mineral materials at varying moisture contents. Experiments were carried out with two drying devices to see if a simple process would prove capable of handling these requirements satisfactorily. A system employing infrared heaters, with a face area just equal to that of the bottom of a vibrating conveyor over which they were suspended, was found capable of removing an average of 13.6 pounds (6.2 kg) of water for an average feed rate of 275 pounds (124 kg). This required 313 kilowatts of power per ton of solids treated at an approximate cost of $7.80 per ton dried"--Abstract, p. i.
Lien permanent pour cette publication :
publications.gc.ca/pub?id=9.841717&sl=1
| Ministère/Organisme | Canada. Natural Resources Canada. Canada. Mines Branch. |
|---|---|
| Titre | Experiments with radiant heat for drying minerals / R.A. Wyman and T. Marshall, Mineral Processing Division. |
| Titre de la série | Technical bulletin ; TB 183 |
| Type de publication | Série - Voir l'enregistrement principal |
| Langue | [Anglais] |
| Format | Électronique |
| Document électronique | |
| Note(s) | Cover title. "December 1973." Digitized edition from print [produced by Natural Resources Canada]. Includes abstract in French. |
| Information sur la publication | Ottawa : Information Canada, 1974. |
| Auteur / Contributeur | Wyman, R. A. Marshall, T. |
| Description | iv, 60 p. : charts, ill. |
| Numéro de catalogue |
|
| Numéro de catalogue du ministère | 300062 |
| Descripteurs | Minerals Processing |
Demander des formats alternatifs
Pour demander une publication dans un format alternatif, remplissez le formulaire électronique des publications du gouvernement du Canada. Utilisez le champ du formulaire «question ou commentaire» pour spécifier la publication demandée.- Date de modification :