Comparison of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number / V. M. Malhotra and G. Carette. : M38-13/76-8E-PDF
"This paper presents comparisons of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number. Briefly, a pull-out test, which is relatively a new technique, measures with a special tension ram the force required to pull out a specially shaped steel rod whose enlarged end has been cast into the concrete. In this study pull-out tests were performed on 2 x 2 x 1-ft (610 x 610 x 305-mm) concrete blocks. Compressive strengths were obtained on 4 x 8-in. (102 x 203-mm) and 6 x 12-in. (152 x 305-mm) cylinders; also 4 x 8-in. (102 x 203-mm) cores were drilled from the blocks and tested in compression. In addition, pulse velocity measurements and Schmidt rebound hammer readings were also taken on the blocks"--Synopsis, p. i.
Lien permanent pour cette publication :
publications.gc.ca/pub?id=9.865026&sl=1
| Ministère/Organisme |
|
|---|---|
| Titre | Comparison of pull-out strength of concrete with compressive strength of cylinders and cores, pulse velocity and rebound number / V. M. Malhotra and G. Carette. |
| Titre de la série |
|
| Type de publication | Monographie - Voir l'enregistrement principal |
| Langue | [Anglais] |
| Format | Texte numérique |
| Document électronique | |
| Note(s) |
|
| Information sur la publication |
|
| Auteur / Contributeur |
|
| Description | vii, 42 p. : figures. |
| Numéro de catalogue |
|
| Descripteurs |
Demander des formats alternatifs
Pour demander une publication dans un format alternatif, remplissez le formulaire électronique des publications du gouvernement du Canada. Utilisez le champ du formulaire «question ou commentaire» pour spécifier la publication demandée.Détails de la page
- Date de modification :