Wave forces on a pipeline in a trench / by M.G. Skafel and C.T. Bishop.: En13-5/90-118E-PDF

"Most existing design information for wave forces on pipelines deals with the case of pipes on a flat bottom, not in a trench. However, the Beaufort Sea environment will require submarine pipelines to be placed in trenches. Therefore, a series of tests representative of Beaufort design conditions was conducted at a scale of 1:15 in the wind-wave flume of the NWRI Hydraulics Laboratory. The drag and lift coefficients in the Morison equation, calculated from the measured forces, were found to be comparable to values reported in the literature for pipes on flatbeds at the same total depth of water. Flow visualization tests conducted at scale of 1:60 in a smaller flume supported this conclusion"--Abstract.

Permanent link to this Catalogue record:
publications.gc.ca/pub?id=9.877861&sl=0

Publication information
Department/Agency Canada. Environment Canada.
National Water Research Institute (Canada)
Title Wave forces on a pipeline in a trench / by M.G. Skafel and C.T. Bishop.
Series title NWRI contribution ; 90-118
Publication type Series - View Master Record
Language [English]
Format Electronic
Electronic document
Note(s) Digitized edition from print [produced by Environment and Climate Change Canada].
Includes bibliographical references (page [14]).
Includes abstract in French.
Publishing information Burlington, Ontario : National Water Research Institute, March 1990.
Author / Contributor Skafel, M. G., author.
Bishop, Craig Timothy, 1953- author.
Description 1 online resource (14 unnumbered pages) : figures.
Catalogue number
  • En13-5/90-118E-PDF
Subject terms Pipelines
Hydrography
Request alternate formats
To request an alternate format of a publication, complete the Government of Canada Publications email form. Use the form’s “question or comment” field to specify the requested publication.
Date modified: